Application Areas News Section Products Section Company Information Partners Section Enquiries Section Sitemap Section
  
Home Page
  

Home > Products > Protocol Controllers > ATM > Adax T1/E1 - PIM

HDC

Adax T1/E1 - PIM

Download PDF

Overview

The Adax PMC Interface Module (PIM) provides rear-panel T1/E1 I/O access for Adax HDC, HDCII and ATMII PMC boards. The PIM is used on a third-party Rear Transition Module (RTM) that is designed to accept PIMs. The third-party RTM is used with a cPCI board from the same manufacturer on which the Adax PMC cards are installed.

The Adax PIM has four T1/E1 ports, each using an RJ45 connector with circuitry to ensure isolation of these trunks from the rest of the system. Status LEDs are also provided for each trunk. The PIM is intended for use only with Adax PMC boards.

High density narrowband channelized controller for all signaling protocols

Technical Specifications

Interface

  • 4 x T1/E1 ports (rear I/O)

Standards

  • VITA 36-199x PIM compliance

Power Requirements

  • none

Electromagnetic Compatibility (EMC)

The RTM complies with EN50082-1 for EMC immunity. EMC is highly dependant on the RTM and cPCI host card design.
With most RTM and cPCI host card design, EMC should comply with FCC Part 15, Subpart B, Class A and EN55022 Class B.

Flammability

Printed wiring board manufactured with a flammability rating of 94V-0 by UL recognized manufacturers.

Environmental Conditions

  • Operating 0°C to 55°C
  • Storage -40°C to 65°C
  • Relative Humidity 10% to 90%
  • Vibration 20-2000Hz Random

Board Dimensions

74mm x 69mm
 


All specifications are subject to change without notice.  

  
Adax Inc Tel: 510 548 7047
Email:  
Adax Europe Ltd Tel: +44 (0) 118 952 2800